2026 — Новини

The rotary lobe Alfa Laval SRU pump (Sweden) is a reliable solution for pumping process liquids in the dairy, food, brewing, chemical and pharmaceutical industries, as well as in household chemicals and personal care applications. The pump is designed in accordance with the strictest hygienic standards and allows for Clean-in-Place (CIP) operation without disassembly. It is an optimal... Read more →

Applications of Grundfos CM pumps: Water supply Pressure boosting Water circulation in heating and air conditioning systems Pumping liquids in industry Freshwater fish farming Horticulture Agriculture Technical specifications: Max. pressure, operating temperature: 10 bar Liquid temperature: from -30°C to +120°C... Read more →

Thanks to its hydraulic characteristics and compact dimensions, the Dreno Compatta series manufactured in Italy is an optimal solution for pumping domestic wastewater. In the standard version, the shaft sealing is implemented by a lip seal on the motor side and a mechanical seal on the impeller side. The maximum permissible liquid temperature is 40 °C with the pump fully submerged.... Read more →

EBARA 3M pumps are mainly used for: water supply, pressure boosting, air conditioning, washing, irrigation, swimming pools, etc. In our case, the pump transfers brewing wort. A standard seal (GRAPHITE / CERAMIC / NBR) was used, which is not suitable for this medium (brewing wort). We replaced this seal with a BTS Engineering Ebara 3MHS mechanical shaft seal . We offer the following... Read more →

High-pressure pumps Fristam FPH and FPHP series are centrifugal, multistage pumps. They are designed for recirculation in reverse osmosis systems, with the possibility of adaptation to specific products, processes, and applications. FPH pumps can operate with inlet pressures up to 600 pounds per square inch, while FPHP models can operate up to 1000 pounds per square inch. Fristam FPH... Read more →

Single-stage end-suction pumps CNP series NISO, NIS, NISF are compact and easy to install. Thanks to the technological design, the bearing assembly with the impeller and sealing unit can be dismantled without disconnecting the pump casing from the pipelines. The pump is equipped as standard with a wear-resistant mechanical seal NISO-43/BSE4 728124298676 graphite/silicon carbide/EPDM. In... Read more →