R-MG13
Uszczelnienie mechaniczne R-MG13
Temperaturavv: -20°~140°
Ciśnienie: ≤1.4 MPa
Prędkość: ≤15 m/s
Materiał
- Obrotowy pierścień: Carbon/SIC/TC
- Stały Pierścień: Ceramic/SIC/TC.
- Mieszek: NBR / EPDM / VITON.
- Sprężyna: SS304 / SS316.
- Części metalowe: SS304 / SS316.
Pojedyncze uszczelnienie mechaniczne R-MG13. Możliwe zastosowanie w pompach Alfa Laval, Ebara (3M, DWO), Lowara, KSB (Etanorm, Etachrom), WILO (MVI, MHI, IPL/DPL), Grundfos (CDM), Saer (IP) i wielu innych. Odpowiednik: Burgmann MG13, AESSEAL B02, Flowserve Pac-Seal 193, ROTEN L3, Vulcan Type 193, ANGA A1, Sterling SMG13, uszczelniacz 212.
| d1 Н6 | d3 (Max) | d7 | L33 (±0 5) | L4 | d12 (H8) | 114 |
| 10 | 22,5 | 21 | 33,4 | 6,6 | 19,2 | 6,6 |
| 12 | 25,0 | 23 | 33,4 | 6,6 | 21,6 | 5,6 |
| 14 | 28,5 | 25 | 33,4 | 6,6 | 24,6 | 5,6 |
| 15 | 28,5 | 27 | 33,4 | 6,6 | 24,6 | 6,6 |
| 16 | 28,5 | 27 | 33,4 | 6,6 | 28,0 | 7,5 |
| 18 | 32,0 | 33 | 37,5 | 7,5 | 30,0 | 8 |
| 19 | 36,5 | 35 | 37,5 | 7,5 | 35,0 | 7,5 |
| 20 | 37,0 | 35 | 37,5 | 7,5 | 35,0 | 7,5 |
| 22 | 37,0 | 37 | 37,5 | 7,5 | 35,0 | 7,5 |
| 24 | 42,5 | 39 | 42,5 | 7,5 | 38,0 | 7,5 |
| 25 | 42,5 | 40 | 42,5 | 7,5 | 38,0 | 7,5 |
| 28 | 49,0 | 43 | 42,5 | 7,5 | 42,0 | 9 |
| 30 | 49,0 | 45 | 42,5 | 7,5 | 45,0 | 10,5 |
| 32 | 53,5 | 48 | 47,5 | 7,5 | 48,0 | 10,5 |
| 33 | 53,5 | 48 | 47,5 | 7,5 | 50,0 | 11 |
| 35 | 57,0 | 50 | 47,5 | 7,5 | 52,0 | 11 |
| 38 | 59,0 | 56 | 46,0 | 9 | 55,0 | 10,3 |
| 40 | 62,0 | 58 | 46,0 | 9 | 58 | 10,8 |
| 42 | 65,5 | 61 | 51,0 | 9 | 62,0 | 12 |
| 43 | 65,5 | 61 | 51,0 | 9 | 62,0 | 12 |
| 45 | 68,0 | 63 | 51,0 | 9 | 64,0 | 11,6 |
| 48 | 70,5 | 66 | 51,0 | 9 | 68,4 | 11,6 |
| 50 | 74,0 | 70 | 50,5 | 9,5 | 69,3 | 11,6 |
| 53 | 78,5 | 73 | 59,0 | 11 | 72,3 | 12,3 |
| 55 | 81,0 | 75 | 59,0 | 11 | 75,4 | 13,3 |
| 58 | 85,5 | 78 | 59,0 | 11 | 78,4 | 13,3 |
| 60 | 85,5 | 80 | 59,0 | 11 | 80,4 | 13,3 |
| 65 | 93,5 | 85 | 69,0 | 11 | 85,4 | 13 |
| 68 | 96,5 | 90 | 68,7 | 11,3 | 91,5 | 13,7 |
| 70 | 99,5 | 92 | 68,7 | 11,3 | 92,0 | 13 |
| 75 | 107,0 | 97 | 68,7 | 11,3 | 99,0 | 14 |
| 80 | 112,0 | 105 | 78,0 | 12 | 104,0 | 15 |
| 85 | 120,0 | 110 | 76,0 | 14 | 109,0 | 14,8 |
| 90 | 127,0 | 115 | 76,0 | 14 | 114,0 | 14,8 |
| 95 | 132,0 | 120 | 76,0 | 14 | 120,3 | 15,8 |
| 100 | 137,0 | 125 | 76,0 | 14 | 123,3 | 15,8 |
Sort by:
-10%
13951_38__CAR/SIC__EPDM__304__G6
Uszczelnienie wału pompy R-MG13 38, CAR/SIC, EPDM, 304, G6
-10%
13951_38__CAR/SIC__EPDM__304__G60
Uszczelnienie wału pompy R-MG13 38, CAR/SIC, EPDM, 304, G60
-6%
-10%
13951_28__CAR/SIC__EPDM__304__G6
Uszczelnienie wału pompy R-MG13 28, CAR/SIC, EPDM, 304, G6
-6%
-10%
13951_55__CAR/SIC__EPDM__304__G60
Uszczelnienie wału pompy R-MG13 55, CAR/SIC, EPDM, 304, G60
-6%
-10%
13951_28__CAR/SIC__EPDM__304__G60
Uszczelnienie wału pompy R-MG13 28, CAR/SIC, EPDM, 304, G60
-6%
-10%
13951_50__CAR/SIC__EPDM__304__G60
Uszczelnienie wału pompy R-MG13 50, CAR/SIC, EPDM, 304, G60
-6%
-10%
13951_28__CAR/SIC__VITON__304__G6
Uszczelnienie wału pompy R-MG13 28, CAR/SIC, VITON, 304, G6
-10%
13951_28__SIC/SIC__EPDM__304__G6
Uszczelnienie wału pompy R-MG13 28, SIC/SIC, EPDM, 304, G6
-6%
-10%
13951_50__CAR/SIC__EPDM__304__G6
Uszczelnienie wału pompy R-MG13 50, CAR/SIC, EPDM, 304, G6
-6%
-10%
13951_28__SIC/SIC__VITON__304__G6
Uszczelnienie wału pompy R-MG13 28, SIC/SIC, VITON, 304, G6
-10%
13951_22__CAR/SIC__EPDM__304__G60
Uszczelnienie wału pompy R-MG13 22, CAR/SIC, EPDM, 304, G60
-6%
-6%
-10%
13951_40__CAR/SIC__EPDM__304__G60
Uszczelnienie wału pompy R-MG13 40, CAR/SIC, EPDM, 304, G60
-6%
-10%
13951_15__SIC/SIC__NBR__304__G9
Uszczelnienie wału pompy R-MG13 15, SIC/SIC, NBR, 304, G9
-6%
-10%
13951_38__SIC/SIC__VITON__304__G6
Uszczelnienie wału pompy R-MG13 38, SIC/SIC, VITON, 304, G6
-10%
13951_40__CAR/SIC__EPDM__304__G6
Uszczelnienie wału pompy R-MG13 40, CAR/SIC, EPDM, 304, G6
-10%
13951_48__SIC/SIC__NBR__304__G6
Uszczelnienie wału pompy R-MG13 48, SIC/SIC, NBR, 304, G6
-10%
13951_48__SIC/SIC__NBR__304__G60
Uszczelnienie wału pompy R-MG13 48, SIC/SIC, NBR, 304, G60